LS 120 D
This chipper is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass or for manufacture of chips from aforesaid materials and also for disposal of redundant timber such as sticks, deals, pickets etc. The chipper can dispose all these materials with diameter up to 150 mm or flat boards and plates with thickness up to 60 mm. This chipper is equipped also with NO-Stress anti-blocking device.
|
|
| Technical specification | LS 120 D | | Length | 3 990 mm (3 500 mm – transport) | | Width | 1 800 mm | | Height | 2 720 mm (2 015 mm - transport) | | Weight | 1 130 kg | | Tyres | 155 R 13C | | Load | 5-12 m3/h | | Fuel consumption | 4,9 l/hr | | Recommended branch-wood maximum diameter | 150 mm | | CUTTING HEAD | | | Diameter | 560 mm | | Number of blades | 2 | | Rate of cutting | 42 m/s | | Way of head driving | 3×belt B 17×1250 Li | | Turning on | Possibility to disable its belt drive at engine start | | FEEDING DEVICE | | | Feeding hole size (B×H) | 290 × 220 mm | | Number of rolls | 2 | | Diameter | 220 mm | | Feeding speed | Electonic regulation NOSTRESS | | Driving unit | Hydrostatic | | HOPPER | | | Turning possibility | 360° – 12 positions | | Feeding profile (B×H) | 920 × 800 mm | | ENGINE | LOMBARDINI 9 LD 625-2 | | Type | Four-stroke, air-cooled | | Power output | 21 kW (28,5 HP) - 3000 rpm | | Oil charge | 2,8 l (15W-40) | | Lubrication | Forced with full-flow oil filter | | Fuel | Diesel | | Fuel tank capacity | 20 l | | Max. engine inclination | 25° in all directions | | Start | Electric | | ELECTRIC INSTALLATION | | | Battery | 12 V, 55 Ah | | Work safety elements | Machine-hour meter, charging indicator lamp, master power switch, safety grip |
|
