LS 120/38
This chipper is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass or for manufacture of chips from aforesaid materials and also for disposal of redundant timber such as sticks, deals, pickets etc. The chipper can dispose all these materials with diameter up to 150 mm or flat boards and plates with thickness up to 60 mm. This chipper is equipped also with NO-Stress anti-blocking device.
|
|
| TECHNICAL SPECIFICATION | LS 120/38 | | Length | 3660 mm (3130 transport) | | Width | 1770 mm | | Height | 2620 mm | | Weight | 870 kg (included chassis) | | Tyres | 165/70 R 13 | | Load | ca. 10 m3/hr | | Fuel consumption | 7,8 l/hr | | Recommended branch max. diameter | 150 mm | | CUTTING HEAD | | | Diameter | 560 mm | | Number of blades | 2 | | Rate of cutting | 42 m/s | | Wood chips size | 9 mm | | Cutting drive | 3xBELT B 17x1250 Li | | Turning on | Possible turn off during starting the engine | | FEEDING DEVICE | | | Feeding hole size (B×H) | 290 x 220 mm | | Number of rolls | 2 | | Diameter | 190 mm | | Feeding speed | manual regulation 12 m/min to 40 m/min | | electronic regulation - NOSTRESS | | Driving unit | hydrostatic | | HOPPER | | | Feeding profile (B×H) | 920 x 800 mm | | ENGINE | | | Type | KOHLER COMMAND CH 980 | | Four-stroke, air-cooled | | Power output | 38HP ( 28,3kW ) při 3600 rpm | | Oil charge | 2,85 l (15W – 40 ) | | Lubrication | forced with full-flow oil filter | | Fuel | benzin NATURAL 95 | | Fuel tank capacity | 16 l | | Alternator | 12V 20A | | Max. engine inclination | 25° in all directions | | Start | | | ELECTRIC INSTALLATION | | | Battery | 12V 44Ah | | WORK SAFETY ELEMENTS | | | Machine-hour meter, charging indicator lamp, master power switch, safety grip |
|
