LS 150 T
This chipper is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass or for manufacture of chips from aforesaid materials and also for disposal of redundant timber such as sticks, deals, pickets etc. The chipper can dispose all these materials with diameter up to 160 mm or flat boards and plates with thickness up to 60 mm. This chipper is equipped also with NO-Stress anti-blocking device.
|
Video preview - LS150DW Open
|
| TECHNICAL SPECIFICATION | LS 150T | LS 150 TS | | Length | 2540 mm ; 2040 (transport) | 3350 mm ; 2850 (transport) | | Width | 1370 mm ; 1450 (transport) | 1370 mm ; 1450 (transport) | | Height | 2540 mm ; 2000 (transport) | 2540 mm ; 2000 (transport) | | Weight | 778 kg | 900 kg | | Load | ca. 7-12 m3/hr | ca. 7-12 m3/hr | | Recommended branch max. diameter | 160 mm | 160 mm | | CUTTING HEAD | | | | Diameter | 560 mm | 560 mm | | Number of blades | 2 | 2 | | Rate of cutting | 42 m/s | 42 m/s | | Wood chips size | 9 mm | 9 mm | | Cutting drive | 3x BELT XPB 17x1422 La; cardan | 3x BELT XPB 17x1422 La; cardan | | Turning on | freewheel clutch | freewheel clutch | | PTO Power | 30 – 50 HP | 30 – 50 HP | | PTO Rotation speed | 540 rpm | 540 rpm | | FEEDING DEVICE | | | | Feeding hole size (B×H) | 290 x 220 mm | 290 x 220 mm | | Number of rolls | 2 | 2 | | Diameter | 190 mm | 190 mm | | Feeding speed | manual regulation 12 m/min to 40 m/min | manual regulation 12 m/min to 40 m/min | | Driving unit | hydrostatic | hydrostatic | | HOPPER | | | | Directional rotation | 180° - 7 positions | 180° - 7 positions | | Feeding profile (B×H) | 920 x 800 mm | 920 x 800 mm | | TRACTOR HITCH | | | | 3-point linkage | Category 1, 2 | Category 1, 2 | | ELECTRIC INSTALLATION | | | | Voltage | 12V | 12V | | WORK SAFETY ELEMENTS | | | | Machine-hour meter, charging indicator lamp, master power switch, safety grip | | | ACCESSORIES (options) | | | | Cardan shaft L=1000 mm. Electronic regulation - NOSTRESS | | |
|
