LS 150 D
This chipper is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass or for manufacture of chips from aforesaid materials and also for disposal of redundant timber such as sticks, deals, pickets etc. The chipper can dispose all these materials with diameter up to 150 mm or flat boards and plates with thickness up to 60 mm. This chipper is equipped also with NO-Stress anti-blocking device.
|
|
| DIMENSIONS | | | Lenght : | 3995 mm; 3530 (transit) | | Width : | 1500 mm | | Height : | 2720 mm ; 2030 (transit) | | Weight : | 1100 kg (undercarriage including) | | Tyres : | 185 R 14 C | | Load : | 7 ÷12 m3/hr | | Fuel consumption : | 4,9 l/hr | | Recommended branch-wood maximum diameter : | 150 mm | | CUTTING HEAD | | | Diameter : | 560mm | | Blades : | 2 pcs | | Rate of cutting : | 42 m/s | | Lenght of chip : | 9 mm | | Way of head driving : | 3x BELT B 17x1250 Li | | Turning on : | posibility to disable belt drive at engine start | | FEEDING DEVICE | | | Feeding hole size (BxH) : | 290 x 220 mm | | Number of rolls : | 2 pcs | | Diameter : | 190 mm | | Feeding speed : | Manual : 12m/min - 40m/min | | Electronic : NOSTRESS | | Driving unit : | Hydrostatic | | HOPPER | | | Turning possibility : | 120° - 5 positions | | Feeding profile(BxH) : | 920 x 800 mm | | ENGINE | | | Type : | LOMBARDINI 9 LD 625-2 | | four-stroke , air-cooled | | Power output : | 28,5HP (21 kW ) for 3000 rpm | | Oil charge : | 2,8 l (15W – 40) | | Lubrication : | forced with full-flow oil filter | | Fuel : | Diesel | | Fuel tank capacity : | 20 l | | Max.engine inclination : | 25° in all directions | | Starter : | Electric | | ELECTRIC INSTALLATION | | | Battery : | 12V 55Ah | | WORK SAFETY ELEMENTS | | | Machine-hour meter , charging indicator lamp , master power switch, safety grip | |
|
