LS 150 Track
This chipper is designed for disposal of wood waste, twigs, bark, branch-wood and other above-ground biomass or for manufacture of chips from aforesaid materials and also for disposal of redundant timber such as sticks, deals, pickets etc. The chipper can dispose all these materials with diameter up to 150 mm or flat boards and plates with thickness up to 60 mm. This chipper is equipped also with NO-Stress anti-blocking device.
|
|
| DIMENSIONS : | | | Lenght : | 3330 mm (2875 transit) | | Width : | 1475 mm | | Height : | 2540 mm (1860 transit) | | Weight : | 1225 kg | | Undercarriage : | Track | | Travel Speed : | 4 km/h | | Ratio of inclination : | 50 % | | Load : | 7-12 m3/hr | | Fuel consumption : | 4,9 l/hr | | Recommended branch max. diameter | 150 mm | | CUTTING HEAD : | | | Diameter : | 560 mm | | Number of blades : | 2 | | Rate of cutting : | 42 m/s | | Lenght of chip : | 9 mm | | Way of head driving : | 3xBELT B 17x1250 Li | | Turning on : | posibility to disable belt drive at engine start | | FEEDING DEVICE | | | Feeding hole size (BxH) : | 290x220 mm | | Number of rolls : | 2 | | Diameter : | 190 mm | | Feeding speed : | manual - 12m/min - 40m/min | | electronic - NOSTRESS | | Driving unit : | hydrostatic | | HOPPER | | | Feeding profile (BxH) | 920x800 mm | | ENGINE | | | Type : | LOMBARDINI 9 LD 625-2 | | four-stroke , air-cooled | | Power output : | 28,5 HP (21kW) for 3000 rpm | | Oil charge : | 2,8 l (15W-40) | | Lubrication : | forced with full-flow oil filter | | Fuel : | Diesel | | Fuel tank capacity : | 20 l | | Max. engine inclination : | 25° in all directions | | Starter | Electric | | WORK SAFETY ELEMENTS | | | Machine-hour meter , charging indicator lamp , master power switch, safety grip | |
|
