F 500H/27
This machine is designed for cutting of a stump, i.e. its above- and also under-ground part. Stump diametr – no limitation (recommended up to 0,8 m).
|
Video preview - F 500 H Open
|
| Technical specification | F 500H/27 | | Length | 2520 mm | | Width | 1055 mm or 890 mm (1250 mm – with dual wheels) | | Heigth | 1710 mm (1460 mm with protective shield removed) | | Weight | 760 kg | | Tyres – front wheels | 16x6,50-8 | | Tyres – rear wheels | 23 × 8,50-12 or 5,00-12 (dual wheels) | | Wheel track | 840 mm or 760 mm | | Wheel base | 1200 mm | | Travel gear | Hydrostatic | | Travel speed | max. 3 km/h | | Brake | Hydro-mechanical, automatic | | Steering | Hydraulic | | Cutting head control | Hydraulic, joystick | | Machine power | ca 0,6 m3/h | | CUTTING HEAD | | | Cutting Head diameter | 510 mm (with blades) 440 mm (without blades) | | Cutting bite | 70 mm | | Number of blades | 18 | | Cutting Head drive | 3× Belt XPA 13x1500Lw, 3× Belt B 17×1525 Li | | Drive switching | Electromagnetic clutch | | CUTTING RANGE | | | Above ground | 440 mm | | Under ground | 380 mm | | Operating range | 940 mm | | Stump diameter | Unlimited | | ENGINE | KOHLER CH 740 | | Type | Four-stroke, air-cooled | | Power output | 27 HP (20,1 kW) for 3600 rpm | | Oil charge | 1,9 l (SAE 15W-40) | | Lubrication | Forced with oil filtr | | Fuel | Natural 95 | | Fuel tank capacity | 16 l | | Max. gradient | 25° (In all directions) | | Start | Electric | | ELECTRIC INSTALLATION | | | Battery | 12 V/45 Ah | | CONTROL AND SAFETY ELEMENTS | Running hours counter, charging control lamp, lubrication warning lamp, safety switch, cutting head indication, socket of external circuit |
|
